As an Amazon Associate I earn from qualifying purchases.
1. Fluke Networks #ad
Fluke Networks TRC-CASE Carrying Case for Test Reference Cords, Fiber Tester Accessory #adFluke Networks #ad
- Protects your test reference cords from damage during transportation and storage. Package dimension : 14. 5 centimeters L x 26. 6 centimeters W x 308 centimeters H. Contains an elastic pouch to storing smaller fiber accessories. Country of origin: uNITED STATES.
2. Fluke Networks #ad
Fluke Networks Full Featured Handheld 635 QuickBERT-T1 Tester #adFluke Networks #ad
- Verification test meter analyzes the configuration and performance of T1 facilities and supports full, unframed, and fractional T1. Outputs test results to a printer for records storage and review via an RS-232 cable.
Automatic tests evaluate the framing type, line coding, and BERT patterns on an incoming signal for facility verification and troubleshooting.
Transmits common bit error rate test beRT patterns and all common loop codes, including HDSL, to monitor and test T1 bit error performance and signal transmission. Monitors live traffic and evaluates T1 signaling and frame synchronization status, density violations, framing loss, and error conditions, alarm conditions, to help solve transmission problems.
3. NETALLY #ad
NetAlly LRAT-2000 LinkRunner AT Copper and Fiber Ethernet Network Tester #adNETALLY #ad
- Features basic cable tests, tcp port open, ethernet link and switch port identification, ipv6 support, 50 reports, reflector option, IP ping, TruePower PoE, Li Ion battery.
Autotest accurately identifies network problems in 10 seconds. Tests 10/100/1000 mbps twisted pair and 100/1000 Mbps fiber optic Ethernet links. A handheld ethernet tester for quick, automated verification of network connectivity and availability.
Includes li ion battery, windows 7, linkrunner Manager software. Supported operating systems:Windows Vista, cable identifier 1, Windows XP, Windows 8. Connect an rj-45 or fiber cable 2000 model only from the network hub or wall plate to the LinkRunner AT RJ-45 LAN or fiber port.
4. TREND Networks #ad
TREND Networks | R158004 | PoE Pro | Data Cable and PoE Verifier | Includes Cable Testing Features of The VDV II PRO | Advanced Wiremap & Troubleshooting Tool #adTREND Networks #ad
- The new poe pro removes uncertainty when installing, maintaining, and troubleshooting networks where Power over Ethernet is deployed. This device provides a simple set-up, instant results, and a Pass/Fail indication to make sure your PoE installation works the first time every time.
Poe pro: eliminate guesswork and depend on us to get the job done faster. Depend on us: at trend networks formerly ideal networks, and empower network technicians, data installers, accurate, our mission is to innovate test solutions that are fast, and system integrators to better power up their world.
Cable testing features of vdv ii pro: this device combines familiar cable testing features with an even more comprehensive feature set.
With support for poe up to 90 watts, ieee standard, it identifies the maximum watts available, voltage, check classes 0-8, and which pairs have power. Power over ethernet testing: a fast, this device identifies the Class of the PoE source and power available to a PoE device regardless of cable length, cable quality, accurate poE tester, or other factors. Reduce troubleshooting time: test and verify poe switches and injectors by connecting directly to them.
5. TEMPO #ad
Cable Mapper, CAT5E, Check Continuity, RJ45, CAT5, Network Cable Tester by Tempo Communications, RJ11, CAT6, RJ12 #adTEMPO #ad
- Includes main unit, rj45 shielded patch cords, remote unit, nylon carrying case, 9V battery. Verify proper cabling configuration and good connections.
Cable test begins automatically once the cable is plugged in and the power button is on. Led lights for each pin as the unit goes through the test cycle. Identify good connections, opens, shorts and crosses.
6. Fluke Networks #ad
1 ST Interchangeable Input Adapter for the Power Meter Port on CertiFiber Pro, Fluke Networks NFA-ST-SINGLE, Simplifiber Pro or DTX-xFM2 #adFluke Networks #ad
- For testing ST connections. Package weight : 01 pounds. Country of Origin : United Kingdom. Part number: nfa-sT-SINGLE.
|Brand||Fluke Networks #ad|
|Manufacturer||Fluke Networks #ad|
7. Fluke Networks #ad
Type B Polarity, Fluke Networks TRC-MPO-UP-B Test Reference Cord with MPO/MPO, 1m Length, Fiber Tester Accessory, Unpinned/Pinned #adFluke Networks #ad
- Right connector: MPO Male. Cable type: Testing device cable. Designed to exceed the ease of use, durability and optical quality of generic off-the-shelf patch cords. Type b Polarity. Left connector: MPO Female.
|Brand||Fluke Networks #ad|
|Manufacturer||Fluke Networks #ad|
8. TREND Networks #ad
TREND Networks | R156006 | SignalTEK CT with Touchscreen | Network Transmission & Ethernet Tester Kit | Troubleshoot Data Cabling & Network Issues | Built-in PDF Reporting #adTREND Networks #ad
- Diagnostics: fast autotest functionality provides proof of network performance in seconds. Signaltek ct: the signaltek ct is a cost-effective way to demonstrate that copper cabling has been installed to IEEE802.
3ab gigabit standards correctly and is capable of supporting Ethernet applications. Intuitive: this troubleshooting device has a user-friendly menu structure for trouble-free operation and requires minimal training, while simple cable naming and job creation enhances on-site productivity.
Depend on us: at trend networks formerly ideal networks, and empower network technicians, our mission is to innovate test solutions that are fast, accurate, data installers, and system integrators to better power up their world.
Rj45 contacts are replaceable keeping the cost of ownership down. Durable: the rugged design protects against knocks in the field and requires no calibration. This device supports shielded and unshielded twisted pair cables including Cat 5e, Cat 6, Cat 6A, and Cat 7 TIA 568A and 568B wiring schemes.
9. Fluke #ad
Fluke 3000 FC HVAC Wireless HVAC System #adFluke #ad
- Fluke 3000 fc series wireless multimeter with the Fluke Connect app has all the essentials for convenient test and measurement troubleshooting. Min/max recording. Continuity, diode test, resistance, capacitance and frequency measurements.
Ac and dc voltage measurements to 1000 V, AC and DC current with 001 ma resolution. A3000 fc wireless ac current clamp module has all the essentials for convenient test and measurement troubleshooting: True-RMS AC clamp meter and measures up to 400 A AC.