Kodiak Controls KC25-3# Low Pressure Gauge 3 PSI

#ad
Kodiak Controls Inc. KC25-3# #ad - Pressure gauge 3 psi, incorporates capsule design for use on low pressure systems not limited to Gas measurement ad leakdetection Bellows gauge/Low Pressure Gauge. Gas leak Detection. 2 1/2" dial, 1/4"npt Lower. Zero Adjustment screw. Chrome Plated Case. Capsule type diaphragm to measure low pressures.

#ad



Anderson Metals 56101-04 Brass Pipe Fitting, Barstock Tee, 1/4" x 1/4" x 1/4" NPT Female Pipe

#ad
Anderson Metals 56101-04 #ad - Tee with three openings for connecting and branching three pipes. And its territories. The fitting has an operating temperature range of -65 to +250 degrees F. Fittings are available threaded or unthreaded, sizes, styles, in many shapes, and schedules pipe wall thickness. Anderson metals manufactures brass fittings, valves, and pipe nipples.

The company, is headquartered in Kansas City, founded in 1951, MO. Operating temperature range of -65 to +250 degrees F. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Female npt threads for connecting to male threaded pipes. It has female national pipe Taper NPT threads for connecting to male threaded pipes, creating a tighter seal than straight threads.

Anderson Metals 56101-04 Brass Pipe Fitting, Barstock Tee, 1/4" x 1/4" x 1/4" NPT Female Pipe #ad - When purchasing pipe fittings, as this will affect material type, shape, consider the application, size and required durability. The tee fitting is t-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Brass can be connected to copper, plastic, brass, aluminum, and welded steel.

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A.

#ad



Dwyer Series MPR Miniature Pressure Regulator, Zinc Body, Air Only, Range 0-5 psi

#ad
Dwyer Instruments MPR1-0 #ad - Compact and Lightweight, Low Cost. Models for use with air are self relieving. Bonnet: acetyl; Diaphragm/Seals: nitrile. Female npt threads for connecting to male threaded pipes. Models for air/water are non-relieving. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

S. A. Meets astm b584 standards for quality assurance and ASME/ASMI B16 technical specifications. The low torque, non-rising adjustment knob with locking capability provides easy and precise adjustment. Tee with three openings for connecting and branching three pipes. The series mpr miniature pressure Regulators are compact units that provide low cost, high performance pressure regulation of compressed air or air/water.

Dwyer Series MPR Miniature Pressure Regulator, Zinc Body, Air Only, Range 0-5 psi #ad - Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. And its territories. Air Regulator. Operating temperature range of -65 to +250 degrees F.

#ad



Kodiak Controls KC25-30"H2O Low Pressure Gauge 30" WC

#ad
Kodiak Controls Inc. KC25-30"H2O #ad - Compact and Lightweight, Low Cost. Zero Adjustment screw. And its territories. Air Regulator. 2 1/2" dial, 1/4"npt Lower. Meets astm b584 standards for quality assurance and ASME/ASMI B16 technical specifications. Bonnet: acetyl; Diaphragm/Seals: nitrile. Bellows gauge/Low Pressure Gauge. Female npt threads for connecting to male threaded pipes.

Chrome Plated Case. Operating temperature range of -65 to +250 degrees F. Pressure gauge 30"wc, incorporates capsule design for use on low pressure systems not limited to Gas measurement ad leakdetection Tee with three openings for connecting and branching three pipes. Capsule type diaphragm to measure low pressures.

Kodiak Controls KC25-30"H2O Low Pressure Gauge 30" WC #ad - These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Gas leak Detection.

#ad



Winters PEM Series Steel Dual Scale Economy Pressure Gauge, 0-15 psi/kpa, 2" Dial Display, +/-3-2-3% Accuracy, 1/4" NPT Bottom Mount

#ad
Winters PEM136 #ad - And its territories. Air Regulator. Vacuum/kPa. The circular dial comes in 1. 5" 40 mm, 2" 50 mm, 2. 5" 63 mm, and 4" 100 mm diameters. Bellows gauge/Low Pressure Gauge. The over-pressure limit is 25% of full scale value. Lower mount or center back male connection with either 1/8" or 1/4" NPT rate. The lens for the 4" diameter dial is glass for strength and clarity.

2 1/2" dial, 1/4"npt Lower. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Circular dial is enclosed in a steel case for corrosion resistance. The operating temperature is -40 to 150 degrees F -40 to 65 degrees C. The gauge measures pressure with a dual scale of either psi/kPa or Hg.

Winters PEM Series Steel Dual Scale Economy Pressure Gauge, 0-15 psi/kpa, 2" Dial Display, +/-3-2-3% Accuracy, 1/4" NPT Bottom Mount #ad - Tee with three openings for connecting and branching three pipes. The dial has an aluminum black pointer. Vacuum/kPa. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. Display accuracy is + or - 3/2/3% over the entire range of the gauge ASME B40

100 grade B.

#ad



Barnes & Jones Big Mouth Air Vent

#ad
Barnes & Jones BJ-3BM #ad - Compact and Lightweight, Low Cost. Circular dial is enclosed in a steel case for corrosion resistance. The barnes & jones 3/4" npt air vent is designed for maximum evacuation of steam mains used in single pipe steam systems. Gas leak Detection. Machined brass forged body and cover, brass 3/4" NPT tailpiece and union nut.

Chrome Plated Case. Operating temperature range of -65 to +250 degrees F. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. To be installed in the vertical position. American Made since 1897. Measures pressure with dual scale psi/kPa/Hg. Brass wetted parts for measuring non-corrosive liquid and gas pressure.

Barnes & Jones Big Mouth Air Vent #ad - The bronze diaphragm has been tested to 10 million cycles and is repairable with a new disc. Capsule type diaphragm to measure low pressures. Overall height: 4 3/4" Tee with three openings for connecting and branching three pipes. 2 1/2" dial, 1/4"npt Lower. Vacuum/kPa. The large 5/8" orifice provides 3.

#ad



Digital Low Pressure Gauge with 1/4'' NPT Bottom Connector and Rubber Protector by Uharbour, 0-15 psi, Accuracy 1% .F.S.

#ad
Uharbour #ad - Circular dial is enclosed in a steel case for corrosion resistance. Meets astm b584 standards for quality assurance and ASME/ASMI B16 technical specifications. 1. It applies to these fields of pressure container, automation equipment, matching with laboratory equipment and all vehicles tires including heavy duty ones.

5. High accuracy: performance tested & certified accurate to ±1% relative humidity temperature 25°c with display resolution of 002 psi; four different measuring units to choose: 0 ~ 15 psi, 0 ~ 1 BAR, 0 ~ 1 KGF/CM², 0 ~ 100 KPA.2. Bonnet: acetyl; Diaphragm/Seals: nitrile. Wide application for measuring gas and air pressure.

Digital Low Pressure Gauge with 1/4'' NPT Bottom Connector and Rubber Protector by Uharbour, 0-15 psi, Accuracy 1% .F.S. #ad - Chrome Plated Case. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. To be installed in the vertical position. Measures pressure with dual scale psi/kPa/Hg. American Made since 1897. Digital gas pressure gauge specification: measuring media: gasweight: 115g;Product size: diameter 76 * 32 cmwith rubber protector, 64*27mmwithout rubber pretectorSensor Type: Silicon semiconductor sensorAccuracy: ± 1%.

#ad



Anderson Metals Brass Pipe Fitting, Adapter, 1/8" Male Pipe x 1/4" Female Pipe

#ad
Anderson Metals 56120-0402 #ad - This fitting meets american society for testing and materials ASTM B584 and American Society of Mechanical Engineers ASME/American National Standards Institute ANSI B16 specifications for quality assurance. Pipe fittings are components used for connecting, controlling flow, terminating, and changing the direction of piping in many different industries.

High quality, shock resistance, vibration resistance and durable. 4. 2 1/2" dial, 1/4"npt Lower. The npt threads create a tighter seal than straight threads. Brass can be connected to copper, brass, aluminum, plastic, and welded steel. Rated at 3. 6 cfm @ 3 ozs, the fastest on the market. Female npt threads for connecting to male threaded pipes.

Anderson Metals Brass Pipe Fitting, Adapter, 1/8" Male Pipe x 1/4" Female Pipe #ad - Meets astm b584 standards for quality assurance and ASME/ASMI B16 technical specifications. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This adapter fitting connects pipes or fittings with different end types, diameters, or materials.

And its territories. And its territories.

#ad



Milton S-684-4 1/4" MNPT Male Tank Valve

#ad
Milton S-684-4 #ad - Bellows gauge/Low Pressure Gauge. Chrome Plated Case. One year warranty, unconditionally new replacement or refund for any quality products. Adapter for connecting pipes or fittings of different types. 2 1/2" dial, 1/4"npt Lower. High quality, shock resistance, vibration resistance and durable. 4. It applies to these fields of pressure container, automation equipment, matching with laboratory equipment and all vehicles tires including heavy duty ones.

5. Cap thread size of. 305-32. American Made since 1897. Circular dial is enclosed in a steel case for corrosion resistance. Compact and Lightweight, Low Cost. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass wetted parts for measuring non-corrosive liquid and gas pressure.

Milton S-684-4 1/4" MNPT Male Tank Valve #ad - 1. Standard valve core with plastic cap measures at 1 1/2" overall length. Rated to close under steam from Vacuum - 25 PSIG.

#ad



Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-15 psi/kpa,2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount

#ad
Winters PFQ800 #ad - The ot58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The movement is OT59 brass, and the welding is silver alloy. Compact and Lightweight, Low Cost. For instance, gauge pressure measures pressure relative to ambient air. Tee with three openings for connecting and branching three pipes.

Vacuum/bar. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range. Winters instruments manufactures pressure gauges, diaphragm seals, pressure transmitters, thermometers, and switches.

Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-15 psi/kpa,2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount #ad - Circular dial is enclosed in a steel case for corrosion resistance. 1. The working pressure is a maximum of 75% of full scale value. Display accuracy is + or - 3/2/3% over the entire range of the gauge ASME B40100 grade B. 2 1/2" dial, 1/4"npt Lower. Operating temperature range of -65 to +250 degrees F. To be installed in the vertical position.

#ad



Dwyer Series MPR Miniature Pressure Regulator, Zinc Body, Air and Water, 0-5 psi

#ad
Dwyer Instruments MPR2-0 #ad - Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance. Brass wetted parts for measuring non-corrosive liquid and gas pressure. Display accuracy is + or - 3/2/3% over the entire range of the gauge ASME B40100 grade B. Compact and Lightweight, Low Cost. 2 1/2" dial, 1/4"npt Lower.

Measures pressure with single psi or dual scale psi/kPa/psi/bar/Hg. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Meets specifications astm b584 and ASME/ANSI B16 for quality assurance. Meets astm b584 standards for quality assurance and ASME/ASMI B16 technical specifications.

Dwyer Series MPR Miniature Pressure Regulator, Zinc Body, Air and Water, 0-5 psi #ad - Circular dial is enclosed in a steel case for corrosion resistance. Bonnet: acetyl; Diaphragm/Seals: nitrile. Male national pipe taper npt threads on one end and female NPT threads on the other for connecting pipes with different ends. And its territories. Air Regulator. Battery saving: power by 2 x lr03 aaa 1.

5v included in the package.

#ad